DESIGNED FOR THE FUTURE
The new Graupner mc-26 HoTT radio is our new radio for the aspiring pilot who seeks precision and reliability in a 2.4GHz tray or handheld radio design. With 16 proportional channels, 120 model memory, long range patch antenna, quad bearing 4096 resolution gimbals and advanced software features the mc-26 will not disappoint you.
The mc-26 is designed with the future in mind. Whether you fly airplanes, multirotor, helicopters or drive cars or boats the mc-26 is designed with these in mind when setting up a new model making it a true all-rounder for anything RC.
Ergonomics is another area where the mc-26 is bringing value to the table. The two large high-contrast LCD displays provide the user with valuable system and telemetry visuals that make the mc-26 easy to setup and monitor during use. The internal circular polarized patch antenna has a very high range and provides extended mechanical reliability and also blends well with the radio case. The mc-28 also features gimbals with 4096 step resolutions and quad bearings for precise movement and control. The mc-26 can be fitted with an optional built in Bluetooth module enabling communication with headsets and tablets adding more value and convenience to your mc-26.
The mc-26 can be used in either hand-held or tray configuration. The attached hand-rests can be easily detached transforming the mc-26 to a hand-held radio. The supplied support brackets provide excellent stability and weight distribution while the radio is in use.
Switches, sliders and knobs can be freely assigned to each channel and individually adapted to user needs. There are in total 12 mixers available for programming and eight switchable flight phases that can be individually adapted for each model with voice announcements when changing flight phases. Each switch slider or knob can have its own custom voice file selectable from over four hundred different voice announcements.
REAL-TIME VOICE TELEMETRY
Real-time telemetry is integrated in all our HoTT radio systems. The mc-26 does not require any additional hardware for functions such as signal quality, temperature or receiver voltage. The included 12 channel receiver provides telemetry functions that can be configured to notify you regarding any system changes. Graupner provides a wide selection of telemetry ESCs, modules and sensors that can connect directly to your HoTT receivers without the need for external hub boxes or complex wiring. Our third-party partners provide additional telemetry products that work seamlessly with your mc-26 HoTT radio.
Add situational awareness and extra safety by easily assigning switches to telemetry functions and notifications to provide information about battery voltage, battery capacity, altitude, flight direction, speed, etc. The real-time, bi-directional HoTT transmission protocol will constantly monitor system health and notify you of any changes to the system. No more surprise situations such as sudden battery depletion or accidentally flying out-of-range! During flight, important data is logged on the SD memory card which can be analyzed to improve your system's reliability and performance.
PROGRAMMABLE VOICE ALERTS
Configure any switch or control on the mc-26 with a wide selection of over 400 voice announcements. Set up countless announcement combination options based on your flying needs and airplane conditions with flight-dependent voice triggers. Record your own messages to customize your experience.
Control your model in every conceivable condition with logical switch positions or controls, adding a new dimension of control to the way we fly our models. For example, set up a logical switch that will not allow your gear to come down unless you have your flaps in the landing position. The AND/OR switch combinations are limited only by your imagination.
Set and save a series of up to nine timed events with the three-channel servo sequencer. With the flip of a switch you can retract landing gears and open or close gear doors.
AUTO TRIM AND TRIM STEP
|It's easy to trim your airplane, especially during its first flight! Just fly your airplane at level attitude and trigger the auto trim switch. The mc-26 will automatically set the trims on your airplane. Freely assign the auto trim function to any switch for maximum flexibility during flight. The mc-26 provides additional options for controlling trim settings, resulting in a perfectly trimmed model.|
Need to reverse your motor direction, setup your flight controller or make receiver settings? The mc-26 radio can easily setup, program, and change all Graupner HoTT products remotely, eliminating the need for cables, computers or programming boxes!
MULTIPLE MODEL TYPES
Airplanes, sailplanes, helicopters, multirotors, boats, cars...the mc-28 supports all model types! Each has been specially programmed with different menu functions unique to that particular model. Further enhance the model with assigned voice triggers using specially uploaded (or custom tailored) files.
It is important to all of us at Graupner that you make good use of your investment in our products. All our HoTT products (receivers, flight stabilization systems, ESCs, multirotor flight controllers, flybarless controllers, etc.) are designed to be compatible with one another regardless of the transmitter being used, ensuring the same operation and user experience across all devices. Your model is future-proof against new developments with this unifying technology standard.
Enhance the usability of your mc-26 with our wide selection of HoTT flight controllers for flybarless helicopters, airplanes and multirotors. Graupner is committed to providing endless opportunities for you to discover all the mc-26 has to offer.
Our Wireless Trainer Link allows the mc-26 radio to be used with any other Graupner HoTT radio in Student/Teacher Mode, allowing everyone to learn or teach exciting experiences about this hobby.
CAPTAINS AND TRUCKERS ARE KING
The mc-26 has standard software functions for the boat
enthusiasts that takes boat control to the next level. The built in three ring
limiter for Voith-Schneider drives and our multichannel modules provides setup
of advanced boat control a breeze.
EXPANSIONS AND OPTIONS
The mc-26 radio can be expanded with many options to suite your specific needs. We are offering a wide range of control sticks, switches, channel expanders, light modules and accessories that add more value to your mc-26. Checkout the accessories page for additional products.