Alpha 300 3D Race Copter RFH

Alpha 300 3D Race Copter RFH

review
5
0
5
Your Price:$299.90
Retail Price:$442.80
You Save:$142.90(32%)
In Stock
P/N:16530.HOTT

OVERVIEW

Flying a multirotor will never be the same again! The Alpha 300Q 3D is the new standard for anything multirotor! Whether you are a seasoned 3D pilot or proficient racer, this model will bring you to the next level of multirotor flying: bend the laws of physics and defy gravity with inverted flight, tic toc's and all your favorite 3D maneuvers.

The Alpha 300Q 3D is built around a strong 3mm lightweight carbon competition frame, making it extremely durable during all flight phases. Parts are easily replaced as needed, requiring only basic tools. To assist with flight orientation, a set of high-intensity LED lights are mounted on top and bottom of the frame making it stand out in the bright daylight and the night sky!

Transitioning into 3D flight is easy with the Alpha 300Q 3D race copter. Beginners can change between attitude and 3D modes at any time during flight. Experienced 3D helicopter pilots will feel instantly at home with the Alpha 300Q, easily attaining a level of expertise that will defy logic.

PERFORMANCE

Our engineers at Graupner had to redesign everything and think outside the box to make the Alpha 300Q 3D the best 3D multirotor racer in its class. The extremely lightweight carbon fiber frame was specially created to protect the electronics and battery in the event of a mishap yet remains roomy enough to afford future expansion. To achieve fast and crisp response times, we developed new hand-wound motors that are lighter and much more powerful.  The short switching and programmable Graupner Ultra ESC's can handle the high currents when instantaneously switching motor directions. The 3D propellers have been revised, and the inclusion of our multirotor flight controller makes the Alpha 300Q 3D ready-to-fly right out of the box!

FLIGHT CONTROLLER

The Alpha 300Q 3D is equipped with our powerful S1019 GR-18 receiver and flight controller for multicopters, flybarless helicopters and 3-axis stabilization gyro for airplanes. The all-in-one GR-18 is the most advanced 2.4 GHz receiver ever made by Graupner, in multirotor mode it will support almost any type of multirotor: 3D, Tri Copter, Quad, Hexa Copter and Octo.

The GR-18 is a long-range receiver that uses the Graupner HoTT protocol enabling real-time telemetry data of signal strength, receiver voltage and temperature to assist pilots during flight. Power and simplicity are the hallmarks of the GR-18.  Setting up a multicopter, airplane or helicopter is easy and instantly done over-the-air on any Graupner HoTT transmitter – no computers, programming boxes or complex wiring are needed to set up your model on the workbench or at the field. Need to make a change or adjustment? Just use your radio to make on-the-spot changes after landing, or during flight! The GR-18 flight controller has been specifically optimized for 3D flight and does not require any special settings to fly your Alpha 300Q 3D.

SAFETY

Safety is key when flying race copters and the Alpha 300Q provides you with many safety features for a worry-free experience. Real-time telemetry information is continuously monitored by the GR-18 controller and constantly transmitted from the copter flight systems, providing voice notifications of main battery level, altitude, temperatures and radio signal strength. You are immediately notified when an unsafe condition occurs, such as flying out of range, exceeding FAA altitude or hitting a user-definable low battery level.

CAN I FLY THIS?

The Alpha 300Q can be flown by any intermediate pilot. If you already have some experience with multirotors, flying the Alpha 300Q should not be difficult as it has a stability mode to get you started. If you are a seasoned or beginner 3D helicopter pilot, you will find the Alpha 300Q an excellent training platform due to its close flight performance of collective pitch helicopters.  Ready to step it up?  Hook your Alpha 300Q to a 4S battery pack to enable high-performance fly maneuvers like piro-flips, rainbows, hurricanes, funnels and more.  The best part is, if you make a mistake the worst that will probably happen is a set of broken propellers.

FEATURES

  • Expertly built-no, assembly required
  • Ready-to-fly once bound to your Graupner radio
  • Integrated triple-mode receiver and flight controller
  • Selectable flight modes: beginner to expert
  • Receiver with built-in telemetry: main voltage, RX voltage, RF signal strength, RX temperature
  • Live voice telemetry announcements of flight data
  • Voice notifications of battery level and radio range
  • Over-the-air access for settings with any Graupner HoTT radio (6ch and up)
  • No computer or setup boxes needed
  • Powerful, lightning fast response Graupner Ultra 2300Kv motors with 9mm magnets
  • Graupner high-performance copter 3D-Props
  • High-frequency switching Graupner performance ESC's
  • High-intensity LED light system

PACKAGE CONTENT

  • Quadcopter 3D ALPHA 300 Q ready-to-fly
  • S1019 GR-18 receiver with integrated flight control
  • 2x ULTRA Brushless Motors 2809-2300KV with right-hand thread (P/N S7052)
  • 2x ULTRA Brushless Motors 2809-2300KV with left-hand thread (P/N S7051)
  • 4x ULTRA BRUSHLESS CONTROL 3D 20A ONESHOT Controller with BL Heli Software (P/N S3057)
  • 2x each 6-inch 3D propeller red (R / L)
  • 2x each 6-inch 3D Propeller white (R / L)

REVIEW

RC Groups


5 Stars
CM
Thisc chopter is flying perfect in 3D
Did you find this helpful? 
Reviewed by:  from Texas. on 7/8/2017
5

REWARD POINTS

300 points will be rewarded to you when you buy this item.

RELATED PRODUCTS

ACCESSORIES

Alpha 300 3D Race Copter Kit
$249.00
In Stock
Alpha 300Q 4mm Replacement Arms
$39.90
In Stock
Alpha 300Q Main Chassis Plate
$39.90
In Stock
Alpha 300Q Lateral Plate
$24.90
In Stock
Alpha 300Q Aluminum Post Set
$18.90
In Stock
Alpha 300Q Screws and Small Parts
$8.80
In Stock
Alpha 300Q Set Cover Parts
$4.50
In Stock
Alpha 300 3D Race Copter Frame
$99.00
In Stock
Carrying Case for Radio and 200-300 Size Copter
Sale
$89.00  $66.90
In Stock