HoTTrigger 1400 Sport 3D Green ARF

HoTTrigger 1400 Sport 3D Green ARF

review
3
0
5
Your Price:$249.00
Retail Price:$298.80
You Save:$49.80(17%)
Out of Stock
P/N:13400
  • INCLUDES:Motor, ESC, Servos, Propeller, Spinner, Decals

OVERVIEW

Designed to satisfy the aspiring sport pilot as well as the experienced 3D pilot the HoTTrigger 1400 will not disappoint with its flight performance. Designed around the NACA 63-A-mod the HoTTriger has a wide flight envelope that can take you from slow flight to high speed in a controlled and safe way.

Made out of SOLIDPOR© the HoTTrigger is strong and can take a beating. Flight performance and strength is further enhanced with seamless control surfaces attached to the main wing and elevator further ensuring a streamlined design with minimal drag.

The wings are attached to the fuselage with a special locking mechanism making assembly at the field easy while also securing the wings during flight.

The HoTTrigger 1400 comes fully assembled with motor, ESC, servos and mounting materials. Assembly is straightforward and requires basic tools to finish. There are two versions of the HoTTrigger 1400 where the SD version comes with the option to spray paint the fuselage and using the supplied decal set for final finish.

FEATURES

  • Easy access to battery compartment
  • Carbon tube for main wing
  • Aluminum main landing gear
  • Detachable rudder and stabilizer
  • Custom ball link control horns
  • Quick wing lock assembly (no screws)
  • Optional creative designs with supplied decals
  • Controls: Aileron, Rudder, Elevator, Motor

INCLUDES

  • Powerful motor rated for 4S operation
  • 4 x Control Servos
  • Speed controller with BEC
  • Main landing gear and wheels
  • Wheel pants
  • Propeller and spinner
  • Decorative decals SD and IRON design

REQUIRES

  • Minimal 5 channel radio
  • Battery LiPo 4S 2200 mAh



3 Stars
First 10 flights
I bought this for 2 main reasons. 1. to get into something bigger than my 48 3D planes, 2. I liked how the wings attach so I can put it in my car. I am using an Aura 8 flight controller with 2 Spektrum sats. and a DX7 G2 Tx. It flies great and I have only about 10 flights on it so I am still learning the plane. I realized after installing the flight controller that unplugging the servos to remove the wings was no longer an option(and it wont fit in my car). The landing gear tore out after a slightly rough landing. It had been attached to some thin wood but not enough to truly hold it in place. I used expanding gorilla glue(liberally) to reattach it and it seems to be holding. After a bounce landing, not especially hard for a plane this size while learning how best to land it, one of the wheel skirts tore at the point where it intersects the landing gear. No problem to glue it back in place. After doing so I realized the wheel wasn't spinning true. I split the wheel skirt open to investigate and discovered the brass axle was bent. As soon as I put on a little force it snapped in two. A very poor design I have to say. I emailed Graupner to see if I could get just that part and as of yet (3 days later) have had no response. I see 2 options but a whole new landing gear set or use some small stainless steel bolts, washers and nuts as an axle. I will probably do the later which means I will have to remove permanently the wheel skirts. If there is a small part like that but unavailable, making me spend way ore to replace the whole landing gear it makes no sense. Graupner folks- What do you say? Can I get the brass axle piece?
Did you find this helpful?  3 of 4 Found Helpful
Reviewed by:  from USA. on 9/23/2016
3

REWARD POINTS

249 points will be rewarded to you when you buy this item.

RELATED PRODUCTS

ACCESSORIES

HoTTrigger Rudder Green
$8.99
Out of Stock
HoTTrigger Elevator Green
$19.99
In Stock
HoTTrigger Landing Gear Green
$14.99
In Stock
HoTTrigger Rudder Green
$19.99
Out of Stock
HoTTrigger Propeller
$14.99
In Stock
HoTTrigger Spinner
$8.99
In Stock
HoTTrigger Control Rods
$8.99
Out of Stock
HoTTrigger Battery Cover Green
$14.99
Out of Stock
HoTTrigger Wing Joiner
$14.99
Out of Stock
HoTTrigger Propeller Adapter (Collet)
$8.99
In Stock
HoTTrigger Tail Wheel
$4.39
In Stock
HoTTrigger Fuselage With Motor and Servo  Green
$169.99
Out of Stock
HoTTrigger Left Wing with Servo Green
$59.99
Out of Stock
HoTTrigger Right Wing with Servo Green
$59.99
Out of Stock
HoTTrigger Elevator
$19.99
Out of Stock
HoTTrigger Landing
$14.99
In Stock
HoTTrigger Rudder
$14.99
Out of Stock
HoTTrigger Fuselage With Motor and Servo
$164.99
Out of Stock
HoTTrigger Left Wing with Servo
$54.99
Out of Stock
HoTTrigger Right Wing with Servo
$54.99
Out of Stock
HoTTrigger Motor
$69.90
In Stock