ONE SCREEN TO VIEW IT ALL
See everything in one view! A must-have for flying FPV, the
Graupner On Screen Display Module for HoTT is small and light weight, enabling
installation virtually anywhere on the model or directly on your FPV goggles/monitor.
Automatically view and display all telemetry data from
modules attached to a HoTT receiver: you’ll always know in real-time your GPS location
or voltage. In fact, all connected HoTT
sensors are automatically recognized; delete unnecessary sensors by deselection
with our free PC software.
Easily connect to the HoTT telemetry via the transmitter’s data
socket using a Y-cable to the telemetry connection of the receiver. When
installed in the model the OSD AV signal is connected either in parallel to the
camera’s AV signal or directly to the video input of your video transmitter.
Alternatively, the OSD can also be attached to the AV input
of your video glasses or Graupner FPV monitors between AV OUT and AV IN. The
OSD module does not need to be present when installed between the TX and AV
OUT, considerably saving space and weight on your model.
Freely change the luminosity of the font from transparent to
white and the text fields can be a dark background for easier reading. Keeping track of your data has never been so
fun or as easy.
- Operating voltage 3.3 – 8.4 V
- Telemetry monitoring of: system health, altitude, capacity, main
battery voltage, reception quality, number of satellites (3D or 2D fix)
- Provides information for: artificial horizon, distance, direction,
ground speed, altitude climb and descent trends
- Pilot or model name
OSD display data is dependent on installed telemetry modules. Some OSD functions (i.e. reception quality)
can only be viewed when the OSD is connected to the radio data bus.
- Graupner HoTT OSD Module
The software provided is in accordance with the license terms for Open Source. Software changes based on the existing program code area also subject to the Open Source licensing. Any software amendments must be shared with Graupner/SJ GmbH.