Ever wished you had a skilled pilot next to you teaching you
how to fly aerobatic or 3D maneuvers?
Or, you have been out of the hobby for too long and need a
helping hand to get started re-building up your muscle memory and bring back
your confidence flying RC airplanes or helicopters?
Or, maybe you want to get into flying RC models and there is
no one to help you out and teach you how to fly!
StickMover comes to the rescue!
The StickMover is a training device that translates visual
movements of an RC model to physical control movements you can feel while
watching a maneuver on the screen. The control sticks will mechanically move
while you are holding the sticks to get a sense of the physical movements
needed to replicate the maneuver.
StickMover works with you until you master the maneuver!
What can you do with StickMover?
IMPROVE YOUR FLYING SKILLS
Ever felt that whatever you do it just does not seem right? You
have the maneuver in your head but not in your fingers. For many airplane and
helicopter maneuvers muscle memory is critical and this is what StickMover will
help you to achieve.
With over hundred different flight maneuvers available you
will be able to feel the flight with StickMover!
ANALIZE YOUR FLYING SKILLS
StickMover can be used with flight simulators such as AeroflyRC
and Next where you fly a maneuver using your own radio which is synchronized with
StickMover. As you move your control sticks, StickMover moves its sticks with
When recording your flight on the simulator you can play the
flight, view it and feel the flight and capture those moments you need to
improve for a perfect performance.
With StickMover you can Feel IT, Try IT and go Fly IT!
LEARN NEW MANEUVERS
Ever whished you can expand on your existing skill sets? How
about learning IMAC airplane maneuvers or a pirouetting loop with your helicopter?
With StickMover you select a maneuver to learn and slowly build
up the muscle memory needed to perform the same on your own model.
No more second-guessing which control inputs are needed. With
repetitive practicing using the StickMover you will become an RC ace in no
The StickMover is an excellent training device for flight
instructors enabling them to teach their students not only how to fly but also
which control inputs are needed to successfully master the basics such as
takeoff and landings, stall recovery and basic aerobatics.
Flying clubs can now expand their reach with teaching and
training their students making them better prepared for real flight.
AIRPLANE – HELICOPTER – FPV
The StickMover has an extensive training curriculum that
teaches you new skills from the protective comfort of your home without the
worries of making mistakes that may result in crashing your costly models.
Whether you are an advanced pilot or an aspiring pilot that
wants to progress to the next level of RC flight the StickMover is there to
hold your hand until you become a skilled expert!
- StickMover Control Unit
- 10 Skills
- USB Cable
- AC/DC Power Supply
360 Turn With Roll
4 Point Rainbows With Half Rolls
4 Point Roll 4 Point Roll Back
Backward Knife Edge Pirouette
Backward Rolling Circle
Cuban Eight Backwards
Double 4 Point Tic Toc
Double Roll Backwards
Forward Rolling loop
Four-Way Pirouetting Tic-Toc
Funnel with half rolls
Inverted Backward Horizontal Eight
Inverted Horizontal Eight
Pirouetting Global Reversal
Square of rainbows
2 Turn Opposite Spin
2 Turn Spin
2-2 Point Roll With Full Snap Opposite
45 Degree Down With Full Snap Roll
90 degree snap turns
Cuban Eight With 2-4 Roll
Double Immelmann With Full Roll
Figure M With 3-4 Roll
Humpty Bump Half Roll Up 2-4 Roll Down
IMAC Advanced Known – 2018
IMAC Basic Known – 2018
IMAC Intermediate Known – 2018
IMAC Sportsman Known- 2018
IMAC Unlimited Known – 2018
Inverted forward slip
Inverted Harrier flying
Knife Edge Loop
Knife Edge Snake
Knife edge spin
Left rolling harrier circle
Loop With 4-Point Roll
One Horizontal Snap Roll
Power Rolls Left And Right
Right rolling harrier circle
Rolling Circle With One Roll Inside
Rolling harrier in both directions
Square Horizontal Eight
Square Loop With Half Roll
Stall Turn 3/4 Roll Up and 3/4 Roll Down
Stall turn with 1/4 roll up and 3/4 roll down
Test Robin – Outside Loop
Triangular Loop With Full Roll
Two 3-4 Rolls Reversed
I bought mine at the Toledo show after trying it out at their booth to get a feel for it. Skeptical as I was I started focusing on a few maneuvers which I knew how to fly but were never perfect and sometimes get screwed up without me understanding what I did wrong. Now I am not a pro and consider myself a intermediate flyer so I had my hopes high
I started practicing the knife edge loop and slow rolls which I flew ok, but were never consistent and sometimes all over the place. In the beginning it felt very odd but after 10 minutes I started to get more comfortable with how this thing works. I switched then to my flight simulator to check how I was doing and I gradually noticed improvements.
I did this for 3 days for about 30 minutes and eventually made it to the field. The first time I was flying the knife edge loop I flew the same way as I did before only to catch myself noticing my mistake and immediately correcting them with what I learned with the stickmover. A few minutes into the flight I nailed it each time!
I now started to pick out maneuvers that I would have not dared to fly. Using the stickmover requires to focus on 2-3 maneuvers which you need to practive every day for 20-30 minutes.
If you want to learn how to do things better or properly and learn new rc tricks this is a great product to have.
Only thing they should improve is the load time of the software as it appears it is loading the same stuff each time you start.
Reviewed by: George from Dayton, OH on 4/26/2019
Compatible operating systems:
- Apple Mac OSX (Intel, 10.12 or higher)
Windows 7 / 8 / 10
- CPU: 1.83GHz
Cache: 3 GB RAM
2 GB Disk space HDD or SSD
Graphical processor with 3D support and 256 MB RAM
- CPU: 2.3GHz
Cache: 4 GB RAM
More than 2 GB Diskspace HDD or SSD
Graphical processor with 3D support and 512 MB RAM
Supported Flight Simulators
- AeroflyRC v8