AC Adapter TX 4.2V 500mAh - LiPo - US

4 Review(s)
ON SALE! $14.90 $8.99
P/N: 33032.4
Availability: In Stock


Charge your single-cell LiPo battery with the Graupner AC Adapter TX.  Specially designed to charge transmitter batteries for the mz-24, X-8N or any Graupner radio that utilizes the LiPo 1S2P 4000mAh battery (P/N S8345).


  • 4.2V 500 mAh charger
  • 100 - 240V AC
  • US style outlet plug


  • AC Adapter TX

charger for lipo
as far as i know it works ,cause my lipo shows the charge level came up in the trans. but it would be nicer if it had lights to indicate charging or charged!!!!!!!!!!!!!!!!!
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by: (Verified Buyer)  from se pa. on 12/10/2017
The charger has no way of telling if its on or charging ! a simple led light would make all the difference in the world ..
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Hueytown on 3/29/2019
I purchased this after replacing the battery in my MX-24 with a 5000 mAH 1S2P pack and it appeared not to get fully charged to 4.2 volts as indicated by the display on the MX-24 using the original charger. The new charger made no difference. After measuring the charger voltage with no load, it does read 4.2 vdc, but when connected and charging, in never gets above 4.08 vdc and the input is 121 vac. The charging current after 12 hrs is only 25 ma. My original battery was a 4000 mAH 1S2P and it would make it to 4.2 vdc. When using a HiTec programmable charger, set to match the battery parameters, the 5000 mAH will make it to 4.2 vdc! I know of others that have the MX-24 Pro that came with the 5000 mAH pack and have never been able to reach 4.2 v indicated!
Did you find this helpful? 
Reviewed by:  from PITTSBURGH on 9/1/2019
The Lipo BatteryCharger for the X-8N Transmitter work great. Its nice not to have to carry around AA batteries.
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Morgan Hill CA on 8/9/2018